We are happy to offer the excellent 1/2" Stainless Steel Electric Solenoid Valve 110V AC Normally Closed VITON.
With so many on offer recently, it is good to have a name you can trust. The 1/2" Stainless Steel Electric Solenoid Valve 110V AC Normally Closed VITON is certainly that and will be a great buy.
For this reduced price, the 1/2" Stainless Steel Electric Solenoid Valve 110V AC Normally Closed VITON comes highly respected and is always a regular choice for most people. U.S. SOLID have provided some excellent touches and this results in great value for money.
U.S. Solid normally closed (N/C) electric solenoid valve is built with a stainless steel body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use with hot or cold water, gas, air, really low viscosity fluids (< 20 cst), oils and hydrocarbons, gas, kerosene, or diesel fuel.
Customers picked this basic function valve for: do-it-yourself jobs, moderate temperature level applications, extreme chemicals, circulation control for watering systems, reverse osmosis systems, or home brewing.
Brand Name: U.S. Solid
Flow Aperture: 16 mm
Body Material: Stainless steel
Gasket/ Diaphragm/ Seal: VITON
Ranked voltage: A/C 110 V, ± 10%
Current: 0.191 A
Power ranking: 21 VA
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Functional pressure range: 0 to 101 PSI/ 0-0.7 Mpa (for Air, Water); 0 to 72 PSI/ 0-0.5 Mpa (for Oil)
Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Circulation value: 4.8 Cv
Minimum operational temperature level: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature level: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, drainage, commercial gas and other media including lots of impurities.
Made in China. Quality control and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
Valve is not intended to be stimulated constantly for more than 8 hours. This can result in burnout of the coil, and malfunctioning of the valve.
Don't leave empty-handed! Simply enter your email below and we will send you a great discount on our products:
We hate spam as much as you do! Your details are never shared and you can unsubscribe at any time.