Buy Valves Now are currently selling the fantastic 1/4" Stainless Steel Electric Solenoid Valve 24VDC Normally Closed VITON at a great price. Don't lose out - purchase the 1/4" Stainless Steel Electric Solenoid Valve 24VDC Normally Closed VITON online now!
U.S. Solid normally closed (N/C) electrical solenoid valve is built with a stainless steel body, one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Appropriate for use with hot or cold water, gas, air, extremely low viscosity fluids (< 20 cst), oils and hydrocarbons, fuel, kerosene, or diesel fuel.
Clients chose this basic purpose valve for: diy jobs, moderate temperature applications, severe chemicals, circulation control for irrigation systems, reverse osmosis systems, or house developing.
Brand: U.S. Solid
Flow Aperture: 2.5 mm
Body Material: Stainless steel
Gasket/ Diaphragm/ Seal: VITON
Ranked voltage: DC 24 V, ± 10%
Current: 0.583 A
Power rating: 14 W
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Functional pressure range: 0 to 101 PSI/ 0-0.7 Mpa (for Air, Water); 0 to 72 PSI/ 0-0.5 Mpa (for Oil)
Flow capacity: 0.23 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow worth: 0.23 Cv
Minimum functional temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum functional temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, gas, diesel fuel, kerosene and so on. Can not be utilized in strong acid, strong base, drainage, commercial gas and other media including lots of impurities.
Valve is not planned to be stimulated constantly for more than 8 hours. This can cause burnout of the coil, and malfunctioning of the valve.
Quality control: CE Certified
Don't leave empty-handed! Simply enter your email below and we will send you a great discount on our products:
We hate spam as much as you do! Your details are never shared and you can unsubscribe at any time.