- Full Orifice
- Straight Body
- 1/4" Male NPT Inlet
- 1/4" Male NPT Outlet
- 316 Stainless Steel Construction
- Built for service approximately 1,800 psig, which is the maximum pressure at which the stem can easily be turned
- Proudly 100% produced in the USA in our Bartlesville, Oklahoma facility
- 100% leakage checked
MGM Model 19A stainless steel needle valves are created for use in laboratory or other applications where fluid transfer is needed. Design 19A is ruggedly developed for severe environments of approximately 350º F and 1500 psig. The 19A function American Standard 1/4" male pipe threads on each end to mate with brand-new or existing fittings or equipment. The 19A needle valve has replaceable Teflon stem pointers and o-ring packing.
KEEP IN MIND: DO NOT use a wrench to tighten up the stem versus the seat. The 19A is a soft-seated (Teflon to stainless steel) needle valve. Hand wheel needs to be finger tightened only. Over tightening up the valve will lead to unneeded contortion of the Teflon idea and might permanently damage the stem threads.
About MGM: Metal Goods Manufacturing Company, Inc. was established in 1939 in Bartlesville, Oklahoma and has been producing options for circulation control and fluid handling constantly considering that then. MGM makes a total line of needle valves, pressure relief valves, fittings, and pipes for 1/4" NPT piping and sampling systems. In addition, MGM makes check valves and rail tank car elements for procedure markets, refineries, and other midstream consumers. MGM takes pride in our custom of quality and remains dedicated to producing 100% of our products in the USA.
1/4" NPT 316 Stainless Steel Needle Valve Model 19A (Male Inlet & Outlet) Made in the USA