Apollo Valve 10-600 Series Bronze Safety Relief Valve, ASME Hot Water, 50 psi Set Pressure, 1-1/4" NPT Female from Conbraco

Price: $267.70
Product prices and availability are accurate as of 2020-07-03 19:06:22 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
In stock. Usually ships within 3 to 4 days.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Buy Valves Now are delighted to offer the brilliant Apollo Valve 10-600 Series Bronze Safety Relief Valve, ASME Hot Water, 50 psi Set Pressure, 1-1/4" NPT Female.

With so many available today, it is good to have a brand you can trust. The Apollo Valve 10-600 Series Bronze Safety Relief Valve, ASME Hot Water, 50 psi Set Pressure, 1-1/4" NPT Female is certainly that and will be a excellent buy.

For this price, the Apollo Valve 10-600 Series Bronze Safety Relief Valve, ASME Hot Water, 50 psi Set Pressure, 1-1/4" NPT Female comes highly recommended and is a popular choice for lots of people. Conbraco have added some nice touches and this means good value for money.

Manufacturer Description

This Apollo Valve 10-600 series hot water relief valve safeguards against extreme water pressure due to failure of controls to manage BTU input. It has a bronze body, a 50 pounds per square inch (psi) relief pressure, and a 1-1/4" female National Pipe Thread (NPT) inlet connection and 1-1/4" female NPT outlet. The valve's body and spring cage are bronze for resistance to deterioration. The seat is silicone for resistance to heats and is elevated for draining water far from the seat area. The spring is steel for resistance to deterioration, and a fabric-reinforced, molded EPDM (ethylene propylene diene monomer) diaphragm isolates the spring from water at all times. The valve can be used in operating temperatures around 250 degrees F. This relief valve is American Society of Mechanical Engineers (ASME) security ranked for Area IV heating boilers and is appropriate for hot water heating boilers and hot water supply systems.

Relief valves eliminate excess pressure or vacuum from a system. The valve openings allow fluids or gases to run away to decrease pressure, then close once the valve reaches the reseating pressure limitation. They also relieve excess vacuum by opening to launch a gas into the system then closing after it reaches its low-pressure limitation. Some relief valves have a modification system to set the pressure where the valve opens, making it appropriate for various applications. Relief valves are ranked according to the volume of fluid or gas that can flow through them and the product that the valve is constructed from have to be appropriate for the fluid or gas, which might be corrosive or at a severe temperature, where it runs. Relief valves are used in a range of applications, such as air compressors, petrochemical and chemical production, natural gas processing, and power generation.

Apollo Valves produces ball, mixing, and relief valves, actuators, water determines, marine fittings, heating and plumbing items, and backflow prevention. The company, founded in 1928 and headquartered in Matthews, NC, fulfills worldwide basic International Company for Standardization (ISO)/ IEC basic 17025:2005.

Product Features

ASME section IV certified capacity Corrosion resistant construction Fabric reinforced molded diaphragm isolates spring from water at all times Bronze body and spring cage Standard discharge outlet

Write a Review