Stainless-steel 28mm Carbonator Cap and Stainless Steel Gas Side (IN) Ball Lock With 1/4" MLF Flare Fitting Included 5/16" OD Quick Disconnect Swivel Barb Carbonates 'still beverages' & protects carbonated beverages. The Carbonator can be utilized to inject or preserve Co2 in any beverage. Your imagination is the limitation. Carbonate soda & juice, power drinks, cocktails or simply plain water! Co2 goes into solutions well when both Co2 and solution are cold. Co2 tends to come out of solution under warmer conditions (or out gas). Comprehending this will insure successful usage of The Carbonator Valve Coupling. Stainless steel connections provide the finest in strength and sanitation. You can connect your CO2 line to this disconnect with the assistance of an appropriate-sized swivel nut and stem. Cautions: NEVER usage on glass bottles Never use more than 40 P.S.I. Relieve pressure by depressing center valve prior to removing container Regularly examine working condition of total system Replace any used or broken item prior to utilizing Replace plastic soda bottles often Do no let cold carbonated beverages become too warm (Co2 pressure enhances considerably with temperature increase) Never point device at anyone, including operator Remove The Carbonator gradually Do not over-tighten Please wear security goggles Features: Ball style Used for gas side 1/4" MLF fitting.
Both the Ball Lock and the Carbonator are Made of 304 Stainless Steel
Carbonates 'still beverages' & preserves carbonated beverages. The Carbonator can be used to inject or maintain Co2 in any beverage
Carbonate soda & juice, power drinks, mixed drinks or just plain water