NANPU 3 in 1 Twin Air Filter Pressure Regulator Gauge Kit 3/8" Water/Oil Trap Separator offer you finest usage experience ever.
Installation and Operating:
1. Please cleaning up the port and fitting prior to installing, preventing bringing filthy thing to the air course.2.
Pay attention to direction of air flow and arrow pointing on body if match, minding port and tooth type if proper.3.
Adjustment of pressure: Pull up the knob of modification of pressure up, clockwise rotation, pressure is increasing. Anticlockwise rotation, pressure is down. Enjoy the air gauge and point variety and change the necessary pressure, then press the button to the lock status.4.
Water bowl excretion. When it is no air pressure, water bowl will automated excrete. When it has air pressure, the drain column will increase. Water bowl excreted, releasing the drain column after drain ended up, then drain column will automated rebound, drain ended. When the water level is beyond ceiling, please drain. Otherwise that will trigger bad dehumidification.5.
Adjustable oil: Clockwise turned needle valve, oil dropped will reduce. Anticlockwise turned needle valve, oil dropped will increase. After changed air flow and set needle valve, air flow and oil dropped will increase, air flow and oil dropped will reduce.6.
Refueling technique: You can open air course then refueling oil. Anticlockwise rotates refueling screw, refueling capacity does not surpass 80% of bowl. After refueling, please lock refueling screw.
Please beware to utilize a wrench to tighten up the fitting. It is normal if there are extra threads, you can feel complimentary to utilize.
The very first setup may have an excretion response(Not leak, for the very first time the internal pressure is different from the outside, it is necessary to discharge the excess air initially). In this case, please await a while.
Regulator With 150 psi Gauge
Oil Lubricator, Oil & Water Separator
Air Inlet: 3/8" NPT
Max Pressure : 150 psi
Temperature Range: 5-60 degrees C (40-160F)