Butterfly valve, lever deal with, EPDM, sizing: 8-inch. Set up 80 pipes are thicker, much heavier developed to deal with more PSI than Set up 40. In the United States, Set up describes the density of the pipeline wall and, for that reason, just how much pressure it will certainly hold. In many aquaculture applications, Set up 40 is made use of. The main reason to use Set up 80 is if it is mandatory in your area for certain applications but it can also be made use of on cold water loops to help insulate. Set up 80 is rated at no less than 200 psi at 73 degrees F (as much as 2 inches) and is normally Gray (similar to the Set up 40 pipeline made use of for electrical avenue). The outside diameter (O.D.) is the exact same as Set up 120 and 40, but the inside diameter (I.D.) is smaller sized. Backed by over 40 years of both product and process advancement experience, Spears have actually turneded into one of the leading producers of thermoplastic valves, fittings, and piping system elements. Spears broad product line provides a complete selection of 1/8-inch through 12-inch injection formed fittings and fabricated fittings through 48-inch, numerous specialized products, and a full complement of manual and mechanically actuated thermoplastic valves in a variety of types, sizes, and setups.
Butterfly valve
PVC lever handle; EPDM
Size: 8-inch
Schedule 80 PVCs are thicker, stronger, will handle higher pressures, and endure colder climates than Schedule 40 PVCs
Schedule 80 PVCs: not for Compressed Air or Gas; conforms to ASTM D 1785; fittings conform to ASTM D 2467; threaded fittings conform to ASTM D 2464